Model 8620 Thermostat with
™
Event-Based Air Cleaning and
Humidity or Ventilation Control
Owner’s Manual
Includes
Operating Instructions and
Warranty Information
READ AND SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TABlE Of CONTENTS
ABOUT yOUR NEW THERMOSTAT
WARNING
ABOUT yOUR NEW THERMOSTAT
pROGRAM SCHEDUlE AND HOlDS
Thermostat features . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls & display overview . . . . . . . . . . . . . . . . . . . 4-5
Set time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Understanding program schedules . . . . . . . . . . . . 23-24
Progressive recovery . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing program schedules . . . . . . . . . . . . . . . . 25-26
Heat Blast™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Do not use sharp instruments to press touch screen. Only use your fingertips.
THERMOSTAT fEATURES
OpERATION
• Indoor air quality control.
– Humidification automatic or manual control.
Select system mode
(EM HEAT/HEAT/OFF/COOL/AUTO). . . . . . . . . . . . . . . . 6
Program schedule holds
– Dehumidification.
Temporary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
Permanent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Vacation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Change temperature set point. . . . . . . . . . . . . . . . . . . . 6
Select fan setting (ON/AUTO/CIRC) . . . . . . . . . . . . . . . 7
Clean screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance reminders. . . . . . . . . . . . . . . . . . . . . . . . . 8
Screen lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
– Event-Based™ air cleaning.
– Ventilation with temperature and humidity limits.
Note: The 8620 can only control one of the following per installation: ventilation, whole home dehumidifier
or humidifier.
SETUp MENU
• Temperature control.
• Heat Blast™ raises the room temperature 3°F to 5°F.
How to enter the setup menu
to change settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Large touch screen with adjustable backlight – constant backlight available.
• Message center provides feedback, instructions and service reminders.
• 7 day programmability or separately programmable weekday/weekend schedules.
• User interface can be removed from the wall for easy programming (batteries must be installed).
• 24VAC or battery powered, with front battery door access for fast, easy replacement.
• Displays room temperature, room humidity, temperature setting, and outdoor temperature.
• Programmable fan control with fan circulation mode.
User system settings table . . . . . . . . . . . . . . . . . . 32-33
INDOOR AIR QUAlITy fUNCTIONS
Event-Based™ air cleaning . . . . . . . . . . . . . . . . . . . 10-11
WARRANTy
Humidity control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic mode . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Manual mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
If dehumidification is installed. . . . . . . . . . . . . . 16-18
If dehumidification is done with air conditioner . . . 19
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Warranty registration. . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fresh Air. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
• Easy to use temperature control can override program schedule at any time.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT yOUR NEW THERMOSTAT
ABOUT yOUR NEW THERMOSTAT
CONTROlS & DISplAy OVERVIEW – HOME SCREEN
CONTROlS & DISplAy OVERVIEW – MAIN MENU
rooM TEMPErATUrE
CUrrEnT DAy oUTDoor TEMPErATUrE
TEMPErATUrE sETTIng
rooM rELATIVE HUMIDITy
AIR CLEANING BUTTON
FAN MODE
BUTTON
(ENTERS EVENT-BASED™ AIR
CLEANING CONTROL SCREEN)
HUMIDITy ConTroL BUTTon
(EnTErs HUMIDITy ConTroL
SCREEN)
FAN MODE
SETTING
sysTEM MoDE
BUTTON
FRESH AIR BUTTON (ENTERS
VENTILATION CONTROL SCREEN)
SET VACATION HOLD
SET SCHEDULE
BUTTON
TEMPErATUrE ADJUsTMEnT
INDICATORS SHOW THROUGH HOUSING
HEAT pUMp ONly
EMErgEnCy HEAT or
AUXILIAry HEAT (rED)
(HOLD–TO TIME AND DATE)
sysTEM MoDE
SETTING
SET CURRENT
TIME AND DATE
EQUIPMEnT
STATUS
sysTEM fAULT (yELLow)
MESSAGE
CENTER
(SCROLLING TEXT)
CLEAN SCREEN
(LOCKOUT TOUCH
SCREEN FOR 30
SECONDS)
DONE BUTTON
(EXIT MENU)
HOLD BUTTON
(SETS OR CLEARS HOLD)
Low BATTEry
INDICATOR
CURRENT TIME & DATE
HEAT BLAST BUTTON
MAIN MENU BUTTON
UsEr sysTEM sETTIngs
NOTES: BACkLIgHT Is ACTIVATED wITH fIrsT BUTTon PrEss AnD AUToMATICALLy TUrns off.
noT ALL BUTTons wILL BE DIsPLAyED In EVEry InsTALLATIon.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OpERATION
OpERATION
SElECT SySTEM MODE
(EM HEAT/HEAT/OFF/COOL/AUTO)
CHANGE TEMpERATURE SET pOINT
SElECT fAN SETTING (ON/AUTO/CIRC)
ClEAN SCREEN
When the fan mode is changed during a program event
it remains in that mode until the next event starts. The
fan must be programmed to fAn on in the schedule to
run continuously through all events.
press [MENU] to enter the main menu.
press [ClEAN SCREEN] to disable the touch screen
for 30 seconds for cleaning.
Note: Use a soft damp cloth to clean the screen. Use
water or household glass cleaner. Do not spray liquids
directly on the screen.
press [MODE] to select:
EM HEAT: (only for heat pumps with auxiliary heat)
Thermostat controls auxiliary heat. Heat pump will not operate
in EM HEAT mode.
press
or
to adjust the current set point.
press [fAN] to select:
(see Program schedule Holds on pages 27-30 for
more information.)
ON: Fan runs continuously. Use this mode for maximum
air circulation/filtering.
HEAT: Thermostat controls only the heating system.
Off: Heating and cooling systems are off.
AUTO: Fan runs only when the heating or cooling
system is on.
COOl: Thermostat controls only the cooling system.
CIRC: same as AUTo, but ensures the fan is on for at
least 30 minutes per hour. Use this mode for a balance
of energy savings and air circulation/cleaning.
AUTO: (if enabled in installer setup) Thermostat automatically
selects heating or cooling depending on the indoor
temperature.
press [DONE] to save and exit, Or [CANCEl] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 10 seconds.
press [DONE] to save and exit, Or [CANCEl] to exit without
saving. The thermostat will save and exit if nothing is pressed
within 10 seconds.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OpERATION
OpERATION
MAINTENANCE REMINDERS
SCREEN lOCKOUT
BATTERy INSTAllATION
Maintenance reminders are set up by the installer to
indicate when the equipment is due for service. If a
maintenance reminder is displayed, call your HVAC
dealer for service. They can be cleared by pressing
The user can disable certain features of the thermostat.
(see User system setting Table on pages 32-33 for
details.) This feature can be overridden by pressing and
holding [MENU] for 7 seconds.
The thermostat can be battery powered, AC powered
or both. when wired for AC power, the batteries are
optional and only provide back-up power to the clock.
RESET
BUTTON
The thermostat has a memory backup that saves the
thermostat’s settings in case of a power interruption. The
system settings will be retained but the clock will reset
after 90 seconds with no battery or AC power.
[MENU] to enter the main menu. press
select yEs to service reminders and then press [Next].
press and to select yEs for each reminder
and
you would like to reset. press [Next] to go to the next
reminder or [Back] to go to a previous reminder. press
[DONE] to reset the selected service reminders.
The reset button located under the battery cover can be
used to reset the thermostat to factory defaults.
WARNING
The reset button should only be used by the installer.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
EVENT-BASED™ AIR ClEANING
EVENT-BASED™ AIR ClEANING (CONTINUED)
press [AIR ClEANING] on the Home screen to enter
the Air Cleaning screen.
Automatic: The air cleaner will run a minimum of
30 minutes every hour. The air cleaner will monitor
the amount of time your heating and cooling system
runs; if 30 minutes is not reached the air cleaner will
automatically turn on. This will maximize the amount of
air cleaning while minimizing energy consumption.
Air Cleaning Screen
Event Clean (3 hour cycle): When selected, the air
cleaner will run for 3 hours continuously and then return
to the most recent mode of Off, Automatic, or Constant
Clean. This option only cleans the air when needed; an
example would be after vacuuming.
AIR CLEANING MODE
SELECTION
AIR CLEANING MODE
ADJUsTMEnT
Allergies (24 hour cycle): When seasonal allergies
spike and outside air quality is at its worst, choose
this option. your air cleaner will run continuously for
24 hours, then return to the most recent mode of Off,
Automatic, or Constant Clean.
If installed, air cleaning can operate in five different
modes. Air cleaning will activate the fan for the purpose
of air cleaning.
Off: The air cleaner will not call the fan for the purpose
of air cleaning. Note: If air cleaning is installed, air
cleaning will still occur during normal fan operation
during heating, cooling or other indoor air quality events.
CANCEL BUTTON
(EXIT AIR CLEANING)
Note: The thermostat will manage fan and air cleaning
selections when the selections overlap.
DONE BUTTON (SAVE MODE
AND EXIT AIR CLEANING)
Constant Clean: This option will provide the maximum
amount of air cleaning available. The air cleaner will be
active for 24 hours a day, seven days a week.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
HUMIDITy CONTROl
HUMIDITy CONTROl (CONTINUED)
press [HUMIDITy CONTROl] on the Home screen to
enter the Humidity Control screen.
Humidity Control Screen for Humidification in Automatic Mode
In automatic mode you will receive the optimum
amount of humidity so that your home and its
furnishings are protected from the damaging effects
of excess condensation or low humidity during
heating season. The thermostat automatically adjusts
your home’s relative Humidity based on the outdoor
temperature.
The humidity setting needs to be set initially to
meet your home’s conditions. Please follow these
steps when adjusting your thermostat.
HUMIDIfICATIon sETPoInT
HUMIDIfIEr ADJUsTMEnT
1. Adjust the humidity setting to “3” which is within
normal range. During the next 24-48 hours it may
be necessary to adjust the setting for more or less
humidity, depending on your personal comfort and
home’s requirements.
The Humidity Control screen is used to access control for
both humidification and dehumidification.
If humidification is installed it can be controlled in two
modes, automatic or manual.
2. During the coldest portion of the first heating
season, minor adjustments may be necessary. This is
dependent upon your home’s construction.
AUTOMATIC MODE:
INDICATION OF HUMIDIFICATION
sETPoInT LEVEL
Automatic or manual mode is configured by the installer.
To determine which mode the thermostat is set to, see
the diagrams on pages 13 and 15.
The relative Humidity in your home will now be
accurately controlled to meet your needs and should not
need further adjustment during future heating seasons.
DONE BUTTON
(EXIT HUMIDITy ConTroL)
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
HUMIDITy CONTROl (CONTINUED)
HUMIDITy CONTROl (CONTINUED)
Humidity Control Screen for Humidification in Manual Mode
In manual mode it is important to anticipate a drop in
outdoor temperature and reduce the setting accordingly
to avoid excessive condensation. Use the following
table to determine the proper relative Humidity
setting.
Outdoor Temperature/Indoor Relative Humidity
Recommended
Outside Temperature
Relative Humidity
+50°F
+40°F
+30°F
+20°F
+10°F
0°F
50%
45%
40%
35%
30%
25%
20%
15%
HUMIDIfICATIon sETPoInT
HUMIDIfIEr ADJUsTMEnT
-10°F
-20°F
MANUAl MODE:
sCrEEn CyCLEs rECoMMEnDED
HUMIDIfICATIon sETPoInTs
FOR VARIOUS OUTDOOR
TEMPErATUrEs
DONE BUTTON
(EXIT HUMIDITy ConTroL)
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
HUMIDITy CONTROl (CONTINUED)
HUMIDITy CONTROl (CONTINUED)
Energy Saving Tip #1:
If dehumidification is installed the thermostat can
be configured, through the installer set-up, to control
dehumidification with either a whole home dehumidifier
or with the air conditioner (cooling unit).
your comfort is the best measure of how to adjust
your setting. When first installed, your dehumidifier
has to remove all the moisture that is initially in your
home. The home acts like a sponge so the moisture in
the materials of your home is at the same level as the
air. After drying the air, the materials of the home will
release the moisture back into the air until they are
again at the same level. As a result, it is not uncommon
for dehumidification to operate for an extended period
of time when it is first installed.
Energy Saving Tip #2:
Adjust the setting to be as high as is comfortable to
reduce dehumidification run time – if it feels clammy or
smells damp or moldy lower the setting. To save energy,
turn the dehumidifier control OFF when you open your
windows just as you would with air conditioning.
If vacating your home for an extended period in the
summer, set the Relative Humidity at 60% and set
the cooling setpoint as high as you are comfortable
setting it to in cooling mode. Consult with appropriate
professionals regarding the highest temperature that
is safe for your pets or possessions. This will keep
the humidity at a controlled level to help prevent mold
while minimizing the amount of the cooling energy
used. Vacation hold is a convenient way to adjust the
dehumidification and cooling setpoint when you will
be away.
The thermostat will allow you to set the desired humidity
(% relative Humidity) level in your home and can be used
to turn the dehumidification On or Off.
Use the dehumidification adjustment to set the
dehumidification setpoint to 60% when first installed.
Allow dehumidification to run until the initial setpoint
is reached, before deciding if you want to change the
humidity setting.
Raise the setting if you prefer the air to be
less dry; this will reduce the amount of time that
dehumidification runs.
lower the setting if you prefer the air to be
more dry; this will increase the amount of time that
dehumidification runs.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
HUMIDITy CONTROl (CONTINUED)
HUMIDITy CONTROl (CONTINUED)
Humidity Control Screen with only Dehumidification Installed
If dehumidification is done with the air conditioner, the thermostat will cool up to 3°f beyond the cooling
setpoint for dehumidification. note overcooling may not be sufficient to meet the dehumidification setpoint.
DEHUMIDIfICATIon sETPoInT
DEHUMIDIfIEr ADJUsTMEnT
DONE BUTTON
(EXIT HUMIDITy ConTroL)
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR AIR QUAlITy fUNCTIONS
INDOOR AIR QUAlITy fUNCTIONS
fRESH AIR
fRESH AIR (CONTINUED)
fresh Air Screen
press [fRESH AIR] on the Home screen to enter the
Fresh Air screen.
If ventilation is installed, Fresh Air can operate in four
different modes.
Off: Ventilation will not run.
Automatic: Ventilation will cycle based on the
parameters set by the installer to meet your home’s
ventilation requirements.
3 Hour Event: Ventilation will be constantly energized
for 3 hours and then the fresh air mode will return to Off
or Automatic depending on which was mode was most
recently active. This option is used when fresh air is
needed. An example would be after cooking.
FRESH AIR MODE SELECTION
24 Hour Event: Ventilation will be constantly energized
for 24 hours and then the fresh air mode will return to
Off or Automatic depending on which was mode was
most recently active. This option is used when a large
amount of fresh air is desired. An example would be a
day with desirable outdoor conditions.
frEsH AIr MoDE ADJUsTMEnT
CANCEL BUTTON
(EXIT FRESH AIR)
DONE BUTTON (SAVE MODE
AND EXIT FRESH AIR)
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
pROGRAM SCHEDUlE AND HOlDS
pROGRAM SCHEDUlE AND HOlDS
SET TIME AND DATE
UNDERSTANDING pROGRAM SCHEDUlES
press [MENU] to enter the main menu.
press
or
to set the hour.
The daily schedule is split into four sections:
press [SET ClK/DATE] to enter clock menu.
WAKE: temperature you would prefer to wake up to.
lEAVE: temperature when you are away from the house.
RETURN: temperature you would prefer to return home to.
SlEEp: temperature you would prefer while sleeping.
The times shown in the table below are the defaults. The start time and temperature of each section can be changed
to fit your schedule. (see Changing Program schedules section on pages 25-26.)
This thermostat is pre-set to use the following program settings (see table below). we recommend these settings,
since they can reduce your heating/cooling expenses. The fan program is pre-set to AUTO for all events.
press [Next], then
press [Next], then
press [Next], then
press [Next], then
or
or
or
or
to set the minute.
to set the month.
to set the day.
Set temperature
to set the year.
Event designator
WAKE
Start time
6:00AM
8:00AM
5:00PM
Heat
Cool
fan
press [DONE] to save and exit, Or [CANCEl] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 20 seconds.
70°F (21°C)
62°F (17°C)
70°F (21°C)
62°F (17°C)
78°F (26°C)
85°F (29°C)
78°F (26°C)
82°F (28°C)
AUTO
AUTO
AUTO
AUTO
LEAVE
RETURN
sLEEP
10:00PM
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
pROGRAM SCHEDUlE AND HOlDS
pROGRAM SCHEDUlE AND HOlDS
UNDERSTANDING pROGRAM SCHEDUlES (CONTINUED)
CHANGING pROGRAM SCHEDUlES
optionally, the thermostat can be set to a two event schedule. (see setup Menu on page 31.)
Set temperature
press [MENU] to enter the main menu.
press [Next], then
the first event.
or
to set the start time of
press [SET SCHEDUlE] to enter schedule programming.
Event designator
WAKE
Start time
6:00AM
Heat
Cool
fan
70°F (21°C)
62°F (17°C)
78°F (26°C)
82°F (28°C)
AUTO
AUTO
sLEEP
10:00PM
Use the table below to assist in modifying the schedule.
press
or
to select the day.
Set temperature
Event designator
WAKE
Start time
Heat
Cool
fan
press [Next], then
the first event.
or
to set the setpoints of
LEAVE
RETURN
sLEEP
pROGRESSIVE RECOVERy
The Progressive recovery feature allows the thermostat to activate the heating and cooling equipment pRIOR to a
scheduled event in order to reach the desired temperature at the start of that scheduled event.
Example: If the wAkE time is 6 am, and the temperature is 70°, the heat will come on before 6 am, so the
Note: This step is not displayed for weekday/weekend
temperature is 70° by the time you wake at 6 am.
schedules.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
pROGRAM SCHEDUlE AND HOlDS
pROGRAM SCHEDUlE AND HOlDS
CHANGING pROGRAM SCHEDUlES (CONTINUED)
HEAT BlAST™
pROGRAM SCHEDUlE HOlDS – TEMpORARy
TEMpORARy pROGRAM HOlD
press [Next], then [fAN] to set the fan mode of the
first event.
The thermostat will display the CoPy option.
Heat Blast™ will raise the current room temperature 3°F
to 5°f based on the installer set-up, and then resume
normal operation.
press
or
to immediately adjust the temperature
when the schedule is running. This will temporarily hold
the temperature setting until the next scheduled event.
press [Heat Blast] to activate Heat Blast.
Note: Heat Blast button is only available if it is enabled
in the Installer Setup and the thermostat is in Heat or
Emergency Heat mode.
To cancel Heat Blast
press [CANCEl], or
[Heat Blast], or the
temperature adjust
buttons.
press [COpy] to copy the schedule of the day just
programmed to any other day.
press [Next] to advance to the next event.
repeat above process for each remaining event.
press [DONE] to save the schedule for the day.
OR
press [CANCEl] to proceed to the next day and repeat
the above process.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
pROGRAM SCHEDUlE AND HOlDS
pROGRAM SCHEDUlE AND HOlDS
pROGRAM SCHEDUlE HOlDS – TEMpORARy
pROGRAM SCHEDUlE HOlDS – pERMANENT
pERMANENT pROGRAM HOlD
pROGRAM SCHEDUlE HOlDS – VACATION
VACATION pROGRAM HOlD
(CONTINUED)
press [NEXT], then adjust the dehumidification setting.
press
or
to adjust the end time of the hold. If
press [HOlD] to permanently hold the temperature at
its current setting while the schedule is running. This
will override the temperature settings for all events.
with the thermostat in Permanent Hold, the temperature
setting and fan mode can be adjusted and will stay at
that setting until the hold is cancelled.
This energy saving feature allows you to suspend the
programmed schedule for extended periods of time. The
temperature and dehumidification setpoint (optional)
you select will be maintained 24 hours a day until the
vacation program hold end date and time. Once the
end date and time have been surpassed, the previously
programmed schedule will resume. If you return earlier
than expected, press [CANCEl HOlD] to resume the
programmed schedule.
Note: If dehumidification in vacation mode is not
enabled this step will be skipped.
end time is not adjusted, the Temporary Hold will end at
the start of the next event.
press [MENU] to enter
the main menu.
press [SET VACATION]
to enter vacation
To cancel the Temporary Hold, press [CANCEl HOlD].
program hold.
press
to adjust the
or
To cancel the Permanent Hold, press [CANCEl HOlD].
temperature setting.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
pROGRAM SCHEDUlE AND HOlDS
SETUp MENU
HOW TO ENTER THE SETUp MENU TO CHANGE SETTINGS
pROGRAM SCHEDUlE HOlDS – VACATION (CONTINUED)
press [Next], then [fAN] to set the fan mode.
press [Next], then
or
to set end date.
press [MENU] to enter the main menu.
press [SETUp] to enter the setup menu.
press
flashes.)
or
to adjust the setting. (selected option
Press [DONE] to save and exit, Or [CANCEl] to exit
without saving.
The thermostat will discard changes and exit if nothing
is pressed within 60 seconds.
press [Next], then
or
to set end time.
press [Next] or [Back] to page through the settings
(the setting is displayed in the message center).
MESSAGE CENTER
(SCROLLING TEXT)
press [DONE] to save and exit, Or [CANCEl] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 20 seconds.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUp MENU
SETUp MENU
USER SySTEM SETTINGS TABlE
USER SySTEM SETTINGS TABlE (CONTINUED)
The following table is the list of the settings and their details. Default settings are shown in bold.
User system
setting
Description
factory default setting (bold) and setting range
User system
setting
Description
factory default setting (bold) and setting range
Backlight intensity Backlight intensity as a
percentage of full on
100
Selection of 0 – 100%
Temperature
scale
Set the thermostat to Fahrenheit fahrenheit
or Celsius mode
Celsius
Daylight savings
Enable or disable auto daylight
savings
OFF
Second Sunday in March to the first Sunday in November
first sunday in April to the last sunday in october
Screen lockout
Screen lockout level
Off : No lockout
Partial lockout
Full lockout
Reset Service
reminders
Clears the Change Air Filter and No
HVAC and Dehumidifier Service yes
reminders if they are active
and resets the start date to the
current date.
Partial lockout type (only available when screen
Allow changes to fan Mode, System Mode and Setpoints
lockout is set to partial lockout) Allow changes to Fan Mode and Setpoints only
Allow changes to Setpoints only
Max Temp Setpoint Select temperature setpoint
Change in Lockout limits (only available when
screen lockout is set to partial)
3 degrees
Clears the Change water Panel
reminder if it is active. If the
reminders is set to timed, the
clock will be reset.
0 to 20 degrees
Max Dehum
Select dehumidification setpoint 5 percent Relative Humidity
Setpoint Change in limits (only available when
0 to 15 percent Relative Humidity
Lockout
screen lockout is set to partial)
Events per day
number of program events
per day.
4 events per day
2 events per day
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
THERMOSTAT fIVE yEAR lIMITED WARRANTy
your research Products Corporation Aprilaire® Thermostat is expressly warranted for five (5) years from date of installation to be free from defects
in materials or workmanship.
research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for any thermostat
which is found to be defective within such five (5) year period and which is returned, together with the date of installation, no later than thirty
(30) days after said five (5) year period by you to either your original supplier or to research Products Corporation, Madison, wisconsin 53701.
THIs wArrAnTy sHALL noT oBLIgATE rEsEArCH ProDUCTs CorPorATIon for Any LABor CosTs AnD sHALL noT APPLy To DEfECTs In
workMAnsHIP or MATErIALs fUrnIsHED By yoUr InsTALLEr As ConTrAsTED To DEfECTs In THE THErMosTAT ITsELf.
IMPLIED wArrAnTIEs of MErCHAnTABILITy of fITnEss for A PArTICULAr PUrPosE sHALL BE LIMITED In DUrATIon To THE AforEsAID
fIVE yEAr PErIoD. rEsEArCH ProDUCTs CorPorATIon’s LIABILITy for InCIDEnTAL or ConsEQUEnTIAL DAMAgEs, oTHEr THAn
DAMAgEs for PErsonAL InJUrIEs, rEsULTIng froM Any BrEACH of THE AforEsAID IMPLIED wArrAnTIEs or THE ABoVE LIMITED
wArrAnTy Is EXPrEssLy EXCLUDED. THIs LIMITED wArrAnTy Is VoID If DEfECT(s) rEsULT froM fAILUrE To HAVE THIs THErMosTAT
InsTALLED By A QUALIfIED HEATIng AnD AIr ConDITIonIng ConTrACTor. If THE LIMITED wArrAnTy Is VoID DUE To fAILUrE To UsE A
QUALIfIED ConTrACTor, ALL DIsCLAIMErs of IMPLIED wArrAnTIEs sHALL BE EffECTIVE UPon InsTALLATIon.
some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
This equipment if installed in strict accordance with the manufacturer’s instructions, complies with the limits for a Class B computing device
pursuant to subpart J of Part 15 of fCC rules.
WARRANTy REGISTRATION
Visit us on-line at www.aprilaire.com to register your Aprilaire product. If you do not have on-line access, please mail a postcard with your
name, address, phone number, product purchased and date of purchase to: research Products Corporation, P.o. BoX 1467, Madison, wI 53701
your Warranty Registration information will not be sold or shared outside of this company.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|